Choose your Region
Choose Your Region Asia australia Europe Africa South America North America

Torsion Springs, Torque Coils & Clutch Springs

Print to PDFPrint Page

Torsion Springs, Torque Coils & Clutch Springs

Torsion springs, double torsion springs, torque coils and clutch springs are used to apply torque or store rotational energy. The two most common types are single and double-bodied springs. Torsion springs, torque coils and clutch springs are generally mounted around a shaft or arbor and must be supported at three or more points. Various kinds of ends are available to facilitate mounting. These parts can be manufactured from round, square or various shaped material cross sections.

Torque Coils and Clutch Springs – there are many variations of the spring clutch to achieve the designers’ goal of function, reliability and cost. All are based on the principle of utilizing the clutch spring to engage or disengage the driver and driven member by a change in spring diameter. This clutching action may be achieved by the spring either expanding or contracting to link the two members.

Our custom torsion springs, torque coils & clutch springs can be found in counterbalance mechanisms, ratchets and various types of machine components.

Associated Spring facilities are third-party certified to AS9100, ISO9001 or TS16949 and ISO 14001 depending on the markets serviced.

Need a Quote?

In order to quote your custom torsion spring, the following information is preferred:

  • Length of Legs (1 and 2)
  • Deflection Degree of Legs
  • Outside Diameter
  • Wire Diameter
  • Load/torque
  • End Configuration
  • Direction of Wind (L/R)

Torsion Spring Main Site SKETCH

Torsion/Clutch/Torque Coils Quote Form

*denotes a required field
Instead of < and > please use “less than” or “greater than”; instead of / use “-” or “;” to separate values
Yes No

If unable to use contact form, please submit your information here.